Tous les cordons et câbles chauffants
Electric heating cable
Electric Heating Cables
ELTRACE electric heating cables provide innovative and efficient solutions for heating needs across various environments. Ideal for industrial, commercial, and residential applications, our cables deliver optimal performance to maintain stable temperatures, prevent freezing, and protect sensitive installations. Designed for durability and energy efficiency, these cables are widely used in sectors such as refrigeration, construction, and agriculture. Discover our high-quality products, tailored to meet your specific needs, ensuring reliable operation and enhanced safety.
- Details
- Parent Category: Electric heating cable
- Category: Self-regulating heating cable
-
Also available:
Self regulating heating cable "Medium temperature"
FOR TEMPERATURE MAINTENANCE, FOR DOMESTIC HOT WATER, WARM WATER PIPE, OILY WASTE WATER, TANK, VALVES, ALSO TO AVOID THE RISK OF LEGIONELLA, ,..
By using our heat tracer type TRACECO-W you get the best heat tracing system. They are designed to maintain networks of warm water temperature and avoid the risk of legionella.
Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The Box storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClickTM
- Bus wire Cu nickel-plated (2x1.25mm²)
- Self limiting heating element
- Insultation
- Tin-plated copper protective earth wires with Protective aluminium foil
- Thermoplastique outer jacket
Self regulating heating cable power curve TRACECO-W
- Nominal Voltage 230V
- Maximum length circuit:
- TRACECO-W-65……… 110 m
- TRACECO-W-55……… 130 m
- Tolerances -0/+5 W
- Maximum exposure temperature (energised) 80°C
- Maximum exposure temperature (deenergised) 100°C
- Minimum Bending Radius 27 mm
- Minimum installation temperature -20°C
- Weight approx 90 kg/km
Download the technical datasheet TRACECO-W heating cable
- Details
- Parent Category: Electric heating cable
- Category: Self-regulating heating cable
-
Also available:
Small Size Heating Cable TRACECO-S-15
Frost Protection against ice and low temperature maintenance for Pipe, Tank, Receptacles, valves, gutters…
By using our tracers TRACECO(TM) type, you ensure the best heat-tracing system. They are designed to prevent any risk of burst pipes due to freezing. Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs. The Box storage system on coil allows easy handling, quick and convenient.
Self regulating heat cable description
- Bus wire Cu nickel-plated (2×0.55mm²)
- Self limiting heating element
- Insultation
- Tin-plated copper protective earth wires with Protective aluminium foil
- Thermoplastique (TPE-O) outer jacket (Black)
| Reference | Désignation | Power | Dimension (first insulation) | Dimension (overjacketed) |
| TRACECO-15 | TRACECO ESR-S-12-AO | 12 W/m at 10°C | 6.40×3.80 (mm) | 8.10×5.30 (mm) |
Datasheet
- Nominal lVoltage: 230V
- Tolerances: -0/+5 W
- Maximum length circuit: TRACECO-S-12: 110 m
- Maximum exposure temperature (energised): 65°C
- Maximum exposure temperature (deenergised): 80°C
- Minimum installation temperature: <-35°C
- Temperature Class: T6
- Minimum Bending Radius: 27 mm
- Weight approx (alufoil): 66 kg/km
- Weight approx (Braided): 72 kg/km
Cable Qualification
CSTB, EAC, CE, IP67, RoHS, REACH, UV-Resistant
Download the Self Regulating Heating cable TRACECO-S Datasheet
- Details
- Parent Category: Electric heating cable
- Category: Self-regulating heating cable
-
Also available:
Low temperature Self regulating heat cable for corrosive atmosphere
Frost protection and low temperature maintenance for pipe, tank container, in corrosive atmosphere...
The ESR-BOT tape is a self-limiting heating tape for applications for general protection against freezing in pipes. An additional layer connected to the heating element (bonded jacket) increases the effect of the electrical insulation and provides additional protection against moisture.
Fluoropolymer is used as an outer jacket, this material offers increased protection against chemicals
and abrasion. Fluoropolymers are also UV-resistant.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The Box storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®
DESCRIPTION
- Bus wire Cu nickel-plated (2x1.25mm²)
- Self limiting heating element, Matrix
- Insulation
- Braid
- Fluoropolymer overjacket
| Reference | Designation | Power | Dimension |
| ESR-10-BOT | ESR-2-BOT-10 | 10 W/m at 10°C | 11,50 x 5,50 (mm) |
| ESR-15-BOT | ESR-2-BOT-15 | 15 W/m at 10°C | 11,50 x 5,50 (mm |
| ESR-20-BOT | ESR-2-BOT-20 | 20 W/m at 10°C | 11,50 x 5,50 (mm) |
| ESR-25-BOT | ESR-2-BOT-25 | 25 W/m at 10°C | 11,50 x 5,50 (mm) |
| ESR-30-BOT | ESR-2-BOT-33 | 33 W/m at 10°C | 11,50 x 5,50 (mm) |
Product Qualification
ATEX, GOST-R, EAC, CE
Download ESR-BOT heat cable datasheet
- Details
- Parent Category: Electric heating cable
- Category: Self-regulating heating cable
-
Also available:
High Temperature Heating Cable (120°C / 200°C) for pipe, tank, corrosive atmosphere...
The ESR®-H-BOT serie is a self-limiting heating tape that is suitable for freeze protection and for temperature maintenance in applications up to 120 ºC.
It allows steam cleaning in pipes. The heating element, the insulation and the outer jacket of the ESR-H-BOT are made of fluoropolymers.
The Fluoropolymer is Used as an outer jacket, this material offers increased protection against chemicals
and abrasion.
The heating power of the conductive heating element increases or decreases depending on the ambient
temperature. The self-limitation takes effect at every point along the heating tape. The heating power
adapts to the varying ambient temperatures.
High Temp. Heat Tracing
Cable Construction
- Copper, nickel-coated 1.25 mm2
- Heating element : Conductive fluoropolymer
- Fluoropolymer
- Braid
- Fluoropolymer Overjacket
DATASHEET
-
Nominal Voltage 230V
-
Tolerances -2.5/+2.5 W
-
Maximum exposure temperature (energised) 120°C
-
Maximum exposure temperature (deenergised) 200°C
-
Temperature Class T3 (T2 for 60w/m)
-
Minimum Bending Radius 25 mm
-
Minimum installation temperature -40°C
-
Weight approx 120 kg/km
Maximum heating cable length circuit:
-
ESR-H-2-BOT-10………….. 205 m
-
ESR-H-2-BOT-15………….. 190 m
-
ESR-H-2-BOT-30………….. 115 m
-
ESR-H-2-BOT-45………….. 85 m
-
ESR-H-2-BOT-60………….. 65 m
Qualification Produits
Certifications ATEX, GOST-R, EAC, CE
Download ESR-H-BOT heating cable DataSheet
- Details
- Parent Category: Electric heating cable
- Category: Self-regulating heating cable
-
Also available:
Super High Temperature
Self limiting heating cable
Super High Heating Cable Overview
ESR™-SH-BOT self-regulating heating cables are designed for very high temperature holding applications for processes up to +250 °C (483°F).
It is offered in different powers ranging from 100 W/m at 10 °C, which offers exceptional possibilities for industrial processes.
Approved for hazardous, explosive, corrosive and healthy areas, the anti-corrosion outer jacket provides maximum protection in the harshest environments.
The ESR™-SH-BOT is resistant to organic and corrosive chemicals whether in the oil, gas or petrochemical industries.
Application
Advantages of the Super High self-limiting heating cable
- A highly chemical resistant outer jacket.
- The so-called "parallel" heating cable technology allows you to cut to the desired length.
- A self-regulating heating cable suitable for hazardous and corrosive atmospheres.
- Saving energy through self-regulation consumes only what is necessary.
- There is no risk of overheating.
- The Box type reel storage system allows simple, fast and practical handling.
- Several powers available up to 100 W/m @ 10 °C
- A product available in stock.
Download Super High ESR SH BOT cable
- Details
- Parent Category: Electric heating cable
- Category: Self-regulating heating cable
-
Also available:
Our self-regulating heating cables come in five different ranges to suit your projects.
- T-Range: the best-seller of self-regulating cables, a standard recognized for its thermal qualities and its longevity. Ideal for the protection against freezing of pipes, gutters and tanks.
- W-Range: for domestic hot water, heating and medium temperature maintenance.
- S-Range: a commercial, economical, small section range.
- R-Range: a Round cable for the Refrigeration industry more particularly for cold room doors.
- H-Range: for holding or reheating at High temperature.
For more details and technical information, we invite you to consult the product data sheets or contact our « design office » engineers fully dedicated to your projects.
- Details
- Parent Category: Electric heating cable
- Category: Self-regulating heating cable
-
Also available:
What is self-regulating heating cable?
It is a heating cable formed by a semi-conductive matrix inserted between two conductors, to which an electric voltage is applied.
The more the matrix heats up, the more its resistance increases, until the cable reaches thermal equilibrium with its surrounding environment. At stabilization, the resistance is maximum and the power dissipated is minimum.
Its construction is similar to resistors supplied in parallel, whose calorific power is independent of the length of the cabl
What are the advantages of heating cables?
Heating cables, tracers, ribbons, or self-regulating or self-limiting heating cords can save energy.
In addition to this, as the powers per meter are independent of the cable length, the cables cut to the exact length desired without changing the power per meter. They are more robust, and have a longer life span.
Inherently, it is not possible to exceed the maximum temperature for which they are designed which brings an additional security (this is valid for all our self-regulating heating cables).
What are the main applications, where electrical self limiting heating cables are used?
Self-regulating heating cables have two main functions: frost protection and maintenance at low, medium or high temperatures.
- Frost protection of pipes, tanks, containers ....
- Defrosting gutters and gutter descents.
- Defrosting door seals in cold rooms.
- Roof snow removal.
- Temperature maintenance of pipes, tanks, containers ...
Download Self Regulating Heating Cables Datasheet
- Details
- Parent Category: Electric heating cable
- Category: Self-regulating heating cable
-
Also available:
FROST PROTECTING TAPE IS A RELIABLE AND ECONOMICAL SOLUTION TO YOUR PROBLEMS OF FROST PROTECTION
Thanks to the thermostat and the self limiting heating cable
Applications:
GELTRACE™ range is used for the frost protection of pipes. In the protigel™+ version, the thermostat automatically switches on the tape when the temperature falls under +5°C. It enables substantial energy savings and offers in complement the advantages and the safety of a self-regulating tape.
Avoids drainings and permanent use of hydraulic networks. Easy to implement. Available on stock.
Adjustable length according to the network size. Tape finished and controlled in the factory.
No overheating risk thanks to its self regulating system.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
Description of GELTRACE self limiting heating cable
- Bus wire Cu nickel-plated (2×0.55mm²)
- Self limiting heating element
- Insulation
- Tin-plated copper protective earth wires with Protective aluminium foil
- Thermoplastique (TPE-O) outer jacket (Black)
- Thermostat 5°C
- Cold lead (1m 3x1.5mm²)
| Reference | Designation | Power |
| GELTRACE-1 | Self Limiting cable, 1m lenght, with 5°C thermostat and 1m cold lead | 15 W at 10°C |
| GELTRACE-xx | Self Limiting cable, 1m to 35m lenght, with 5°C thermostat, 1m cold lead (available from 1 to 35m) | 15 W/m at 10°C |
| GELTRACE-35 | Self Limiting cable, 35m lenght, with 5°C thermostat, 1m cold lead | 450 W at 10°C |
Read more: Ready to use GELTRACE self limiting heating cable
- Details
- Parent Category: Electric heating cable
- Category: Self-regulating heating cable
-
Also available:
Self-regulating cable "Low temperature"
FROST PROTECTION AGAINST ICE AND LOW TEMPERATURE MAINTENANCE FOR PIPE,..
By using our tracers TRACECO® type, you ensure the best heat-tracing system. They are designed to prevent any risk of burst pipes due to freezing.
Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The Box storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®
Construction of the self regulating heating cable TRACECO
- Bus wire Cu nickel-plated (2x1.25mm²)
- Self limiting heating element
- Insultation
- Tin-plated copper protective earth wires with Protective aluminium foil
- Thermoplastique (TPE-O) outer jacket (Black)
Self regulating heating cable TRACECO - Power curve
Datasheet of the heating cable
- Nominal voltage 230 V
- Tolerances -0/+5 W
- Maximum exposure temperature (energised) 65°C
- Maximum exposure temperature (deenergised) 80°C
- Minimum installation temperature -35°C
- Temperature Class T6
- Minimum Bending Radius 25 mm
- Weight approx. 90-105 kg/km (alufoil)
- Weight approx. 105-126 kg/km (braided)
Self Limiting Cable Maximal length:
- TRACECO-10…………. 200 m
- TRACECO-20…………. 155 m
- TRACECO-30…………. 120 m
- TRACECO-40…………. 100 m
Product certifications : CSTB, EAC, CE, IP67, RoHS, REACH, UV-Resistant
Download Self Regulating Heating Cable TRACECO Datasheet
Subcategories
Self-regulating heating cable Article Count: 9
TRACECO™ and ESR™ self-regulating heating cables, also called heating cables, electric tracers, are electric cables which have been developed to protect against freezing and/or maintain pipes, tanks, flanges, valves, pumps or any other surfaces. Self-regulating heating cables are used in buildings, in industry, in agro, to protect pipes, tanks, containers, farms, as well as for defrosting gutters and downspouts, defrosting negative cold room door seals. For maintaining the temperature of pipes, tanks, containers... They can be cut to any length and avoid any overheating. Easy to use.
Download your Self-Regulating Cables catalog
- TRACECO Classe T - Câble chauffant autorégulant basse température pour mise hors gel
- TRACECO Classe W - Câble autorégulant chauffant moyenne température
- TRACECO Classe S - Câble chauffant autorégulant de petite section
- ESR-R - Câble chauffant autorégulant pour portes de chambres froides
- ESR-BOT - Câble chauffant autorégulant pour la mise hors gel en zone corrosive
- ESR Classe H - Câble chauffant autorégulant haute température
- ESR Classe SH - Câble chauffant autorégulant Super Haute température
- GELTRACE - Le prêt-à-brancher avec thermostat et prise électrique, totalement autonome
Les câbles autorégulants peuvent être immergés (à l’exception des raccordements) lorsque la mention IP68 est indiquée sur le câble. Les câbles autorégulants en fluoropolymère (type ESR™-BOT et ESR™-H-BOT) sont particulièrement résistants et peuvent être utilisés en milieu corrosif (industrie chimique et pétrochimique).
