Floor heating cable for cold room
ELK-SOL type heating cables can be used to protect the floors of cold rooms against heaving caused by frost. This is a cold room floor frost protection electric heater. The cable must cover the contact surface with the substrate and provide a thermal barrier to prevent lifting and other cracks. The power to be installed is around 20 to 40 W/m². Given the inaccessibility of the equipment and the cost of the work, we planned to double the circuit; the second cable constituting a possible recue. Of course, the two cables should never work simultaneously. The cable must be regulated by an electronic thermostat type ELTE-1 or ELTH-B390. The temperature sensor will be placed in a glove finger, in order to make it interchangeable, it will be arranged on the same plane and in the axis of the heating conductors.